What's New...

QM Bearings Blue Brute® Standard Spherical Roller Bearings


From super finished raceways to black-oxide inner rings and adapter sleeves, our new Standard Spherical roller bearings were designed with you in mind.
Read more...

Blue Brute Bearings® - CL Series - QAAPF

Bearing Selection
SelectBase Part#Shaft Size
QAAPF13A060S60mm
QAAPF13A065S65mm
QAAPF13A207S2-7/16"
QAAPF13A208S2-1/2"
QAAPF15A070S70mm
QAAPF15A075S75mm
QAAPF15A211S2-11/16"
QAAPF15A212S2-3/4"
QAAPF15A215S2-15/16"
QAAPF15A300S3"
QAAPF18A080S80mm
QAAPF18A085S85mm
QAAPF18A090S90mm
QAAPF18A303S3-3/16"
QAAPF18A304S3-1/4"
QAAPF18A307S3-7/16"
QAAPF18A308S3-1/2"
QAAPF20A100S100mm
QAAPF20A315S3-15/16"
QAAPF20A400S4"
QAAPF22A115S115mm
QAAPF22A407S4-7/16"
QAAPF22A408S4-1/2"
QAAPF26A130S130mm
QAAPF26A415S4-15/16"
QAAPF26A500S5"
Primary Seal Selection

Click Here for Combination Seals

(Mouse over each seal for a description)

'M' Seal
'M' Seal (Standard)

Triple lip seal made of nitrile rubber for low to moderate speeds (self-purging)


'N' Seal
'N' Seal (Optional)

Triple lip seal made of Viton® for higher operating temperatures and chemical resistance than nitrile at low to moderate speeds (self-purging)


'O' Seal
'O' Seal (Optional)

Triple lip seal made of high strength urethane for superior abrasion resistance at low to moderate speeds (self-purging)


'B' Seal
'B' Seal (Optional)

Double lip seal made of nitrile rubber for extremely most or dirty applications at low speeds (non-purging)


'C' Seal
'C' Seal (Optional)

Double lip seal made of Viton® for higher operating temperature and chemical resistance than nitrile at low speeds (non-purging)


'T' Seal
'T' Seal (Optional)

Labyrinth seal made of Teflon for higher operating temperature, high speed and superior chemical resistance applications (non-purging)


'ML' Seal
'ML' Seal (Optional)

Mechanical labyrinth seal for extreme contaminant exclusion and grease retention at high speeds (non-purging)

Check this box for expansion unit

QAAPF Dimensions (in)
Bearing
Part No.
Shaft
Size
Bearing
Number
A B C DMin DMax E F G H J L M RAA SAA Wt
(lbs)
QAAPF13A060S60mm222132.75 5.80 4.00 6.88 7.63 1.75 9.25 3.00 0.98 5/8 3.65 2.15 0.70 4.30 20
QAAPF13A207S2-7/16"222132.75 5.80 4.00 6.88 7.63 1.75 9.25 3.00 0.98 5/8 3.65 2.15 0.70 4.30 20
QAAPF13A208S2-1/2"22213                             
QAAPF13A065S65mm22213                             
QAAPF15A211S2-11/16"222153.25 6.60 4.50 7.60 9.10 1.88 10.44 3.13 1.29 5/8 3.94 2.37 0.88 4.74 27
QAAPF15A212S2-3/4"22215                             
QAAPF15A070S70mm22215                             
QAAPF15A215S2-15/16"222153.25 6.60 4.50 7.60 9.10 1.88 10.44 3.13 1.29 5/8 3.94 2.37 0.88 4.74 27
QAAPF15A075S75mm22215                             
QAAPF15A300S3"22215                             
QAAPF18A080S80mm222183.75 7.69 5.13 8.88 10.88 2.00 12.30 3.75 1.56 3/4 4.47 2.59 0.84 5.18 49
QAAPF18A303S3-3/16"22218                             
QAAPF18A304S3-1/4"22218                             
QAAPF18A085S85mm22218                             
QAAPF18A307S3-7/16"222183.75 7.69 5.13 8.88 10.88 2.00 12.30 3.75 1.56 3/4 4.47 2.59 0.84 5.18 49
QAAPF18A308S3-1/2"22218                             
QAAPF18A090S90mm22218                             
QAAPF20A100S100mm222204.25 8.78 6.00 10.88 13.38 2.25 14.88 4.31 1.40 3/4 5.13 2.97 0.99 5.94 67
QAAPF20A315S3-15/16"22220                             
QAAPF20A400S4"22220                             
QAAPF22A407S4-7/16"222224.75 9.19 6.30 11.88 14.50 2.50 16.13 4.75 1.58 3/4 5.51 3.13 1.13 6.25 82
QAAPF22A408S4-1/2"22222                             
QAAPF22A115S115mm22222                             
QAAPF26A415S4-15/16"222265.50 11.01 6.89 15.13 15.88 2.75 17.50 5.04 1.54 7/8 6.24 3.72 1.45 7.44 134
QAAPF26A500S5"22226                             
QAAPF26A130S130mm22226