Blue Brute Bearings Selection and Configuration - QM Bearings

'M' Seal

Triple lip seal made of nitrile rubber for low to moderate speeds (self-purging)

'N' Seal

Triple lip seal made of Viton® for higher operating temperatures and chemical resistance than nitrile at low to moderate speeds (self-purging)

'O' Seal

Triple lip seal made of high strength urethane for superior abrasion resistance at low to moderate speeds (self-purging)

'B' Seal

Double lip seal made of nitrile rubber for extremely most or dirty applications at low speeds (non-purging)

'C' Seal

Double lip seal made of Viton® for higher operating temperature and chemical resistance than nitrile at low speeds (non-purging)

'T' Seal

Labyrinth seal made of Teflon for higher operating temperature, high speed and superior chemical resistance applications (non-purging)

'ML' Seal

Mechanical labyrinth seal for extreme contaminant exclusion and grease retention at high speeds (non-purging)

Bearing Part No.	Shaft Size	Bearing Number	A	B	C	D_Min	D_Max	F	G	H	J	L	M	S	Wt (lbs)
TAPKT13K203S	2-3/16"	22213	3.00	6.05	3.35	7.66	8.78	11.25	2.90	1.38	3/4	3.01	1.56	2.56	22
TAPKT13K204S	2-1/4"	22213
TAPKT13K060S	60mm	22213
TAPKT15K207S	2-7/16"	22215	3.50	6.83	3.86	9.06	10.44	13.00	2.91	1.38	7/8	2.84	1.54	2.87	23
TAPKT15K208S	2-1/2"	22215
TAPKT15K065S	65mm	22215	3.50	6.84	3.86	9.06	10.44	13.00	2.98	1.38	7/8	3.22	1.73	2.87	28

Blue Brute Bearings^® - TADV Series - TAPKT